SourceReplacement windows can be described as those that replace a broken or damaged window pane. The replacement windows we replace vary greatly in style and design from one house to another. Most of us only think about replacement windows when there is a problem with the original window. For example, if the old and cracked window pane has developed leaks through the frame, then we usually replace it.
Replacement windows can be constructed for simple installation into an existing window opening. However, if you have done any research into how replacement windows are generally installed or what replacement windows actually are, then you probably already Superhouse know many of the common terms used. Some commonly associated words with replacement windows include full frame windows, semi-framed windows, flush-system windows and sash windows. Other commonly known construction terms include framed wall and framed ceiling or open ceiling construction. But these terms may not give you a complete picture of what replacement windows really are.
Replacement windows and their installation are described by the contractor as either complete or partial replacement of a window. Sometimes they are also called simply new construction windows. In the installation of a new construction window, the contractor would use the same construction paper that he used for the construction of the home and windows. In the installation of partially replacement windows, the contractors would cut out pieces of the original window frame and replace them in the locations where the holes had been made. For flush-system replacement windows, the frame is left intact, but the sashes are cut to fit into the frame openings so as to keep the air in.
A contractor who works on new construction projects would describe the process of replacement windows this way, "The sashes are normally all attached to the frame, but in some cases, sashes are sold separately. Installation begins with removal of the outer frame. The replacement windows will then be installed. Framing is then corrected and the sashes are fitted and reinstalled in the location where they were removed. In some cases, a rash guard is used, instead of a frame, to prevent rain and snow from entering the space between the sashes." This is a pretty comprehensive explanation, but it is sufficient to get you started.
In order to make the best choice of replacement windows for your home, you must know what is involved. Not all replacements are created equally, nor do all dealers provide the same quality of workmanship. In order to get the highest quality product and service, it is best to stick with a reputable dealer who uses only the best raw materials and follows strict quality control processes. If possible, choose an installer who has worked on similar projects and can provide you with a history of success. There is no substitute for experience, and if you are replacing the windows of an existing home, it is imperative that you get the most qualified workman to perform the job.
In addition to making sure that replacement windows and sashes are properly installed, another step is to check for any signs of damage or deterioration. It is a good idea to periodically check the sash and frame for signs of corrosion. While the process may seem intimidating, it can be done by simply taking a few minutes to look for discolorations or rust. If you find discolored or worn areas, it is important to repair these areas before moving on to the next part of the project. Even if the sash and frame are in good condition, the appearance of a window is crucial in determining its overall effectiveness.
When it comes to installing replacement windows in an existing window, there are two common methods. All of them require attaching the new frame to the opening in the exterior. Some newer frames use flush fin systems, which allow for the sash to open completely and flush with the outside edges of the frame. Flush-fin units can also include air-ventilated systems, which keep the heat and cold inside the home where they belong. Whether you choose the flush-fin installation or a traditional sash/frame system, both methods should be tested for proper operation before moving forward.
If you do not want to complete the retrofit process with an exterior frame, there is an option available in most areas. This option requires removing your existing window and re-establishing a connection between the opening in the exterior and the frame. With a simple frame that includes flush mounting hardware and a flat exterior surface, this option is similar to retrofit windows. The main difference is that you do not need to remove the window in order to install the new frame. Instead, the existing window opening is supported with the frame and all of the old exterior materials are used to support the frame.
No comments:
Post a Comment