Replacement windows are designed to replace older windows in a residential home. They are generally designed to be placed inside the original window frame within the house. This allows for a simple, quick and relatively low-cost installation and eliminates the removal of any outside elements. There are many different styles to choose from when choosing replacement windows, including sliding, sash and casement styles. Many people also opt for a unit that has been energy-insulated.
Most of the time, replacement windows are Doorwin Group professionally installed by licensed professionals. If you choose, they can also install the new window at your home after completing your work. This helps protect the old window frame as well. If you decide not to hire a professional, here are some tips on how you can perform the installation:
The most difficult task you will face when installing new construction windows is finding the right size. The most common sizes are a-frame, casement, flanking, side and trim. Your installer will help you figure out the size by taking measurements of your existing home as well as your new construction home's siding or exterior wall. It is always a good idea to have a trusted friend or relative to help with this process as it can quickly get overwhelming.
Many new construction windows have a center divider or sash in the middle of the frame, which can make it difficult to install the replacement windows without having to remove this piece. Some new homes do not have this center divider, so it is recommended you check your new home's siding or wall to make sure the divider will fit into it. You can save yourself quite a bit of time and money by removing the divider before you begin installation. However, if your home has this divider, be sure not to make any adjustments before installing the new windows. This may cause them to stick out on the wrong side.
Once you have the replacement windows installed, you should test each one to ensure they are working properly. When testing the replacement windows, place a finger in the center of each window and slowly pull the skin taut. You should be able to feel a tiny push against the finger and when you push the skin again, there should be no resistance.
If you notice this same problem, most likely you have problems with the fin. Unfortunately, most people do not know how to replace these fins because they are not included with the purchase of the replacement windows. Replacing the fin is actually quite easy, but many do-it-yourselfers are intimidated by the task. Luckily, you can use replacement windows parts such as fin screws, gaskets, and seals to complete the job. There are several tools that you can use to replace these parts.
Another commonly used replacement windows part is the trim ring. You can find trim rings at most home improvement stores; however, you may also be able to purchase them online if you do not have one near you. The trim ring serves a couple different purposes. The first purpose is to cover the opening for the replacement windows and the second purpose is to keep the window trim from getting out of hand.
By following the steps above, you should have no problem installing your new windows and ensuring that your old exterior siding no longer obstructs your new windows. By taking small steps forward when it comes to replacing your existing window opening, you will see long-term benefits to not only your home but your finances as well. The most important benefit, of course, is ensuring your exterior stays looking its best.
No comments:
Post a Comment